Phone: 0049 67 84 70 122
|Material and rotor type||Main component of material||Abrasion resistance||Density g/cm³||Suitable for comminution of|
|Hardened stainless steel||Fe - Cr||fairly good||7.7|
Standard rotor with V-cutting edges and fixed knives,
|medium-hard, brittle samples and for tough-elastic materials and films|
|Hardmetal tungsten carbide||WC||very good||12.4|
|Rotor with V-cutting edges and fixed knives,
order no 45.7370.00
| hard, abrasive samples and hard-tough materials,
hard, abrasive samples and scrap circuit board with glass fibre residue and copper cable
|Chromium-free tool steel||Fe||fairly good||7.8|
Rotor with V-cutting edges and fixed knives,
order no. 45.7112.00
brittle, hard samples, tough-elastic materials and films
At least one sieve cassette is required. Sieve cassettes determine the fineness of a sample. Sieve cassettes with trapezoidal and square perforations made of stainless steel 316L and chromium-free steel DC01 are offered.
Sieve cassettes with trapezoidal perforations improve size reduction through extra shearing action. Sieve cassettes with square perforations are used for the grinding of brittle materials and materials of medium fineness with a narrow grain band.