Другие Щековые дробилки

 
 

ДРУГИЕ ГРУППЫ ИЗДЕЛИЙ

 
 

Щековые дробилки

PULVERISETTE 1

premium line

№ для заказа
01.2030.00
Принадлежности

Пожалуйста, обратите внимание: Дробящие плиты и опорные стенки щековой дробилки FRITSCH PULVERISETTE 1 premium line предлагаются из различных материалов для предотвращения нежелательного загрязнения проб продуктами истирания дробящих частей. Стандартное оснащение состоит из неподвижных и подвижных дробящих плит и боковых опорных стенок из закаленной стали.

По желанию мы оснастим вашу PULVERISETTE 1 premium line, с неподвижными и подвижными дробильными щеками из стали с рифленой поверхностью, имеющими иное влияние на форму и распределение частиц по размерам.

Обычно используются дробящие плиты и опорные стенки из одного и того же материала. Однако, стандартное оснащение боковых опорных стенок из закаленной стали может в большинстве случаев сохраняться, т.к. они подвержены более слабым нагрузкам. Неподвижные и подвижные стальные дробящие плиты с рифленой поверхностью по запросу.

НЕПОДВИЖНЫЕ И ПОДВИЖНЫЕ ДРОБЯЩИЕ ПЛИТЫ и боковые опорные стенки

Руководство по выбору
 
  • Характеристики материалов дробящих плит и опорных стенок

    Материал Основной компонент материала Плотность г/см³ Износостойкость Применение для измельчаемого материала
    закаленная сталь Fe – Cr 7,9 хорошо хрупкие, твердые пробы
    нержавеющая сталь Fe – Cr - Ni 8 условно хорошо среднетвердые, хрупкие пробы
    несодержащая хром инструментальная сталь Fe 7,8 хорошо среднетвердые пробы, измельчение проб для RoHS, например, для XRF-анализа
    марганцевая сталь Fe - Mn 7,8 хорошо твердые, хрупкие пробы
    Твердый сплав карбид вольфрама WC 14,05 очень хорошо очень твердые, абразивные пробы
    Оксид циркония ZrO2 5,7 хорошо среднетвердые, хрупкие пробы, измельчение без металла
    алюминий Al 2,7 условно хорошо хрупкие пробы
    Полиэксилметилен POM 1,14 условно хорошо измельчение без металла

Обычно используются дробящие плиты и опорные стенки из одного и того же материала. При измельчении проб по RoHS - например, для рентгеновского флуоресцентного анализа - лучше всего использовать дробящие плиты и опорные стенки из не содержащей хром стали.
Для полностью безметаллического предварительного дробления среднетвердых хрупких проб, например при эксплуатации в керамической промышленности, мы можем оснастить вашу PULVERISETTE 1 premium line дробящими плитами из оксида циркония, боковыми опорными стенками из полиамида, оксида циркония или алюминия и воронкой и выдвижным ящиком со специальным полиамидным покрытием - другие покрытия по запросу.

Выберите дробящие плиты и боковые опорные стенки

неподвижные и подвижные дробящие плиты

fixed crushing jaw, hardened steel
№ 43.3010.09
Fixed crushing jaw, hardened steel

for the comminution of brittle, very hard samples


General material specification:
Material: hardened steel - 1.2436
Abrasion resistance: good
suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis.


Crushing jaws made of hardened steel belong to the standard equipment of the FRITSCH Jaw Crushers and therefore they are included in the instrument price. 


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialHardened steel - 1.2379
ISO/EN/DIN codeX153CrMoV12
Chemical composition
ElementShare %
Iron – Feapprox. 83.4
Carbon – C1.55 – 2.10
Molybdenum – M ≤ 0.8
Vanadium– V ≤ 0.9
Chromium – Cr12
Tungsten– W ≤ 0.8
Physical and mechanical properties
Density7.7 g/cm³
Hardness60 + 3 HRC


Explanations on hardness data
movable crushing jaw, hardened steel
№ 43.3020.09
Movable crushing jaw, hardened steel

for the comminution of brittle, hard samples


General material specification:
Material: hardened steel - 1.2436
Abrasion resistance: good
suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis.


Crushing jaws made of hardened steel belong to the standard equipment of the FRITSCH Jaw Crushers and therefore they are included in the instrument price.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialHardened steel - 1.2379
ISO/EN/DIN codeX153CrMoV12
Chemical composition
ElementShare %
Iron – Feapprox. 83.4
Carbon – C1.55 – 2.10
Molybdenum – M ≤ 0.8
Vanadium– V ≤ 0.9
Chromium – Cr12
Tungsten– W ≤ 0.8
Physical and mechanical properties
Density7.7 g/cm³
Hardness60 + 3 HRC


Explanations on hardness data
fixed crushing jaw, stainless steel
№ 43.3030.10
Fixed crushing jaw, stainless steel

for the comminution of medium-hard, brittle samples


General material specification:
Material: stainless steel - 1.4571
Abrasion resistance: fairly good
Suitable for: medium-hard, brittle samples
Detailed information about the material you will find in the element analysis.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4571
ISO/EN/DIN codeX6CrNIMo Ti17-12-2
Chemical composition
ElementShare %
Iron – Fe63
Carbon – Cmax. 0.08
Silicon – Simax. 1.0
Manganese – Mnmax. 2.0
Phosphorus – Pmax. 0.045
Sulphur – S0.030
Chromium – Cr16.5 – 18.5
Molybdenum – Mo2.00 – 2.50
Nickel – Ni10.5 – 13.5
Titan – Ti 5 x C≤ 0.70
Physical and mechanical properties
Density8 g/cm³
Hardness95 HB


Explanations on hardness data
movable crushing jaw, stainless steel
№ 43.3040.10
Movable crushing jaw, stainless steel

for the comminution of medium-hard, brittle samples


General material specification:
Material: stainless steel - 1.4571
Abrasion resistance: fairly good
Suitable for: medium-hard, brittle samples
Detailed information about the material you will find in the element analysis.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4571
ISO/EN/DIN codeX6CrNIMo Ti17-12-2
Chemical composition
ElementShare %
Iron – Fe63
Carbon – Cmax. 0.08
Silicon – Simax. 1.0
Manganese – Mnmax. 2.0
Phosphorus – Pmax. 0.045
Sulphur – S0.030
Chromium – Cr16.5 – 18.5
Molybdenum – Mo2.00 – 2.50
Nickel – Ni10.5 – 13.5
Titan – Ti 5 x C≤ 0.70
Physical and mechanical properties
Density8 g/cm³
Hardness95 HB


Explanations on hardness data
fixed crushing jaw, chromium-free tool steel
№ 43.3011.09
Fixed crushing jaw chromium-free tool steel

for the comminution of medium-hard samples


General material specifications:
Material: chromium-free tool steel  – 1.1740
Abrasion resistance: good
Suitable for: medium-hard samples
Detailed information about the material you will find in the element analysis.


For the comminution of RoHS samples – such as for the XRF analysis – crushing jaws and support walls made of chromium-free tool steel are particularly well suited.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialChromium-free tool steel – 1.1740
ISO/EN/DIN codeC60W
Chemical composition
ElementShare %
Iron – Fe98.63 – 98.08
Carbon – C0.55 – 0.65
Silicon – Si0.15 – 0.4
Manganese – Mn0.6 – 0.8
Phosphorus – P0.035
Sulphur – S0.035
Physical and mechanical properties
Density7.8 g/cm³
Hardness52 - 58 HRC


Explanations on hardness data
movable crushing jaw, chromium-free tool steel
№ 43.3021.09
movable crushing jaw chromium-free tool steel

for the comminution of medium-hard samples


General material specifications:
Material: chromium-free tool steel – 1.1740
Abrasion resistance: good
Suitable for: medium-hard samples
Detailed information about the material you will find in the element analysis.


For the comminution of RoHS samples – such as for the XRF analysis – crushing jaws and support walls made of chromium-free tool steel are particularly well suited. 


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialChromium-free tool steel – 1.1740
ISO/EN/DIN codeC60W
Chemical composition
ElementShare %
Iron – Fe98.63 – 98.08
Carbon – C0.55 – 0.65
Silicon – Si0.15 – 0.4
Manganese – Mn0.6 – 0.8
Phosphorus – P0.035
Sulphur – S0.035
Physical and mechanical properties
Density7.8 g/cm³
Hardness52 - 58 HRC


Explanations on hardness data
fixed crushing jaw, manganese steel
№ 43.3130.23
Fixed crushing jaw, manganese steel

for the comminution of hard, brittle samples


General material specifications:
Material: manganese steel - 1.3401
Abrasion resistance: good
Suitable for: hard, brittle samples
Detailed information about the material you will find in the element analysis.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialManganese steel – 1.3401
ISO/EN/DIN codeX120Mn12
Chemical composition
ElementShare %
Iron – Fe83.56 -85.96
Chromium – Cr < 1,50
Silicon – Si0,3–0,5
Manganese – Mn12,0–13.0
Carbon – C1.1 -1.3
Phosphorus – P< 0.1
Sulphur – S< 0.04
Physical and mechanical properties
Density7.9–8 g/cm³
Hardness27–32 HRC


Explanations on hardness data
movable crushing jaw, manganese steel
№ 43.3140.23
Movable crushing jaw, manganese steel

for the comminution of hard, brittle samples


General material specifications:
Material: manganese steel - 1.3401
Abrasion resistance: good
Suitable for: hard, brittle samples
Detailed information about the material you will find in the element analysis.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialManganese steel – 1.3401
ISO/EN/DIN codeX120Mn12
Chemical composition
ElementShare %
Iron – Fe83.56 -85.96
Chromium – Cr < 1,50
Silicon – Si0,3–0,5
Manganese – Mn12,0–13.0
Carbon – C1.1 -1.3
Phosphorus – P< 0.1
Sulphur – S< 0.04
Physical and mechanical properties
Density7.9–8 g/cm³
Hardness27–32 HRC


Explanations on hardness data
fixed crushing jaw, hardmetal tungsten carbide
№ 43.3050.08
Fixed crushing jaw, hardmetal tungsten carbide

for the comminution of hard, abrasive samples


General material specifications:
Material: Hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: very hard, abrasive samples
Detailed information about the material you will find in the element analysis.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialTungsten carbide - WC
ISO/EN/DIN code
Chemical composition
ElementShare %
Tungsten carbide – TC85.00
Cobalt – Co15.00
Physical and mechanical properties
Density14.05 g/cm³
Hardness1020 HV10


Explanations on hardness data
movable crushing jaw, hardmetal tungsten carbide
№ 43.3060.08
Movable crushing jaw, hardmetal tungsten carbide

for the comminution of very hard, abrasive samples


General material specifications:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for very hard, abrasive samples
Detailed information about the material you will find in the element analysis.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialTungsten carbide - WC
ISO/EN/DIN code
Chemical composition
ElementShare %
Tungsten carbide – TC85.00
Cobalt – Co15.00
Physical and mechanical properties
Density14.05 g/cm³
Hardness1020 HV10


Explanations on hardness data
fixed crushing jaw, zirconium oxide
№ 43.3100.27
Fixed crushing jaw, zirconium oxide

for the comminution of medium-hard, brittle samples and metal-free crushing


General material specifications:
Material: zirconium oxide - ZrO2
Abrasion resistance: good
Suitable for: medium-hard, brittle samples, metal-free crushing
Detailed information about the material you will find in the element analysis.


Metal-free pre-crushing
For absolute protection against metal contamination, such as for dental ceramics. Crushing jaws made of zirconium oxide are perfect for completely metal-free pre-crushing of medium-hard brittle samples, for example in the ceramics industry, we can equip your FRITSCH Jaw Crusher PULVERISETTE 1 premium line and classic line with lateral support walls made of:


aluminium:
order no. 43.4040.13 – model premium line
order no. 43.3150.13 – model classic line


zirconium oxide:
order no. 43.4050.27 – model premium line
order no. 43.3160.27 – model classic line


polyamide:
order no. 43.4045.16 – model premium line


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialZirconium oxide - ZrO2
Chemical composition
ElementShare %
Zirconium oxide – ZrO294.2 - 95.2
Hafnium oxide – HfO21 - 2
Magnesium oxide – MgO3.5
Silicon dioxide – SiO20.1
Aluminium oxide – Al2O30.1
Other0.1
Physical and mechanical properties
Density5.7 g/cm³
Hardness Vickers 1200 (HV10)


Explanations on hardness data
movable crushing jaw, zirconium oxide
№ 43.3110.27
Movable crushing jaw, zirconium oxide

for the comminution of medium-hard, brittle samples and metal-free grinding


General material specification:
Material: zirconium oxide - ZrO2
Abrasion resistance: good
Suitable for: abrasive, medium-hard, brittle samples, metal-free crushing
Detailed information about the material you will find in the element analysis. 


Metal-free pre-crushing
For absolute protection against metal contamination, such as for dental ceramics. Crushing jaws made of zirconium oxide are perfect for completely metal-free pre-crushing of medium-hard brittle samples, for example in the ceramics industry, we can equip your FRITSCH Jaw Crusher PULVERISETTE 1 premium line and classic line with lateral support walls made of:


aluminium:
order no. 43.4040.13 – model premium line
order no. 43.3150.13 – model classic line


zirconium oxide:
order no. 43.4050.27 – model premium line
order no. 43.3160.27 – model classic line


polyamide:
order no. 43.4045.16 – model premium line


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialZirconium oxide - ZrO2
Chemical composition
ElementShare %
Zirconium oxide – ZrO294.2 - 95.2
Hafnium oxide – HfO21 - 2
Magnesium oxide – MgO3.5
Silicon dioxide – SiO20.1
Aluminium oxide – Al2O30.1
Other0.1
Physical and mechanical properties
Density5.7 g/cm³
Hardness Vickers 1200 (HV10)


Explanations on hardness data

боковые опорные стенки

1 pair made of hardened steel
№ 43.4000.09
1 pair of lateral support walls, hardened steel

For the comminution of brittle, hard samples.


General material specifications:
Material: hardened steel - 1.2436
Abrasion resistance: good
Suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialHardened steel - 1.2379
ISO/EN/DIN codeX153CrMoV12
Chemical composition
ElementShare %
Iron – Feapprox. 83.4
Carbon – C1.55 – 2.10
Molybdenum – M ≤ 0.8
Vanadium– V ≤ 0.9
Chromium – Cr12
Tungsten– W ≤ 0.8
Physical and mechanical properties
Density7.7 g/cm³
Hardness60 + 3 HRC


Explanations on hardness data
1 pair made of stainless steel
№ 43.4020.10
1 pair of lateral support walls, stainless steel

For the comminution of medium-hard, brittle samples.


General material specification:
Material: stainless steel - 1.4571
Abrasion resistance: fairly good
Suitable for: medium-hard, brittle samples
Detailed information about the material you will find in the element analysis.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4571
ISO/EN/DIN codeX6CrNIMo Ti17-12-2
Chemical composition
ElementShare %
Iron – Fe63
Carbon – Cmax. 0.08
Silicon – Simax. 1.0
Manganese – Mnmax. 2.0
Phosphorus – Pmax. 0.045
Sulphur – S0.030
Chromium – Cr16.5 – 18.5
Molybdenum – Mo2.00 – 2.50
Nickel – Ni10.5 – 13.5
Titan – Ti 5 x C≤ 0.70
Physical and mechanical properties
Density8 g/cm³
Hardness95 HB


Explanations on hardness data
1 pair made of chromium-free tool steel
№ 43.4010.09
1 pair of lateral support walls chromium-free tool steel

For the comminution of medium-hard samples.


General material specification:
Material: chromium-free tool steel -  1.1740
Abrasion resistance: good
Suitable for: medium-hard samples
Detailed information about the materials you will find in the element analysis.


For the comminution of RoHS samples – such as for the XRF analysis – crushing jaws made of chromium-free tool steel and support walls made of chromium-free steel are particularly well suited.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialChromium-free tool steel – 1.1740
ISO/EN/DIN codeC60W
Chemical composition
ElementShare %
Iron – Fe98.63 – 98.08
Carbon – C0.55 – 0.65
Silicon – Si0.15 – 0.4
Manganese – Mn0.6 – 0.8
Phosphorus – P0.035
Sulphur – S0.035
Physical and mechanical properties
Density7.8 g/cm³
Hardness52 - 58 HRC


Explanations on hardness data
1 pair made of hardmetal tungsten carbide
№ 43.4030.08
1 pair of lateral support walls, hardmetal tungsten carbide

For the comminution of very hard, abrasive samples.


General material specification:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: extremely good
Suitable for: very hard, abrasive samples
Detailed information about the material you will find in the element analysis.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialTungsten carbide - WC
ISO/EN/DIN code
Chemical composition
ElementShare %
Tungsten carbide – TC85.00
Cobalt – Co15.00
Physical and mechanical properties
Density14.05 g/cm³
Hardness1020 HV10


Explanations on hardness data
1 pair made of aluminium
№ 43.4040.13
1 pair of lateral support walls, made of aluminium

For the comminution of brittle samples, metal-free grinding.


General material specification:
Material: aluminum - 3.4365
Abrasion resistance: fairly good
Suitable for: brittle samples, metal-free grinding
Detailed information about the materials you will find in the element analysis.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialAluminium AlZnMgCu1,5
ISO/EN/DIN Code3.4365
Chemical composition
ElementShare %
Iron – Fe0.50
Silicon – Si0.40
Copper – Cu1.20 - 2.0
Manganese – Mn0.30
Magnesium – Mg2.1 - 2.9
Chromium – Cr0.18 - 0.28
Zinc – ZN5.1 - 6.1
Titan – Ti0.20
Physical and mechanical properties
Density2,7 g/cm³
Hardness2,75 Mohs


Explanations on hardness data
1 pair made of zirconium oxide
№ 43.4050.27
1 pair of lateral support walls, zirconium oxide

For the comminution of medium-hard, brittle samples, metal-free grinding.


General material specification:
Material: zirconium oxide - ZrO2
Abrasion resistance: good
Suitable for: medium-hard, brittle samples, metal-free grinding


Detailed information about the material you will find in the element analysis.


Lateral support walls of zirconium oxide are only suitable for crushing ceramic materials, minerals etc. and never for hard-tough samples such as metals. 


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialZirconium oxide - ZrO2
Chemical composition
ElementShare %
Zirconium oxide – ZrO294.2 - 95.2
Hafnium oxide – HfO21 - 2
Magnesium oxide – MgO3.5
Silicon dioxide – SiO20.1
Aluminium oxide – Al2O30.1
Other0.1
Physical and mechanical properties
Density5.7 g/cm³
Hardness Vickers 1200 (HV10)


Explanations on hardness data
1 pair made of POM plastic
№ 43.4045.16
1 pair of lateral support walls, POM plastic

For complete metal-free pre-crushing.


General material specification:
Material: Polyoxymethylene - POM
Abrasion resistance: fairly good
Suitable for: complete metal-free pre-crushing


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialPOM Polyoxymethylene
ISO/EN/DIN CodeDIN 7728 C9021
Chemical composition
ElementFormula
Polyoxmethylenecopolymer (Polyacetale)CxH2xOx
Melting point165° C
max. Application temp. constant90°
max. Application temp. briefly140°
Chemical Resistance
Aliphatical hydrocarbon
Aromatical hydrocarbon
Halogenised hydrocarbon
weak acid
strong alkaline solution
Physical and mechanical properties
Density141,g /cm³
Hardnessextremely hard

Принадлежности для предварительного измельчения без металла

Комплект переналадки для полностью безметаллического предварительного измельчения идеален для совершенно свободного от металла предварительного измельчения хрупких проб, например при эксплуатации в керамической промышленности, состоит из воронки и выдвижным ящиком с полиамидным покрытием - другие покрытия по запросу.

Выберите принадлежности для предварительного измельчения без металла

Принадлежности для предварительного измельчения без металла

conversion kit for metal-free pre-crushing
№ 01.2090.00

Conversion kit for metal-free pre-crushing, ideal for complete metal-free pre-crushing of brittle samples, for example in the ceramics industry. Consisting of funnel and drawer, both polyamide-coated - other coatings available on request.


For this, fixed and movable crushing jaws made of zirconium oxide* and lateral support walls made of POM plastic or zirconium oxide* are additionally necessary:


fixed crushing jaw
zirconium oxide*- order no. - 43.3100.27


movable crushing jaw
zirconium oxide* - order no. -  43.3110.27
 
lateral support walls 
POM plastic          - order no. -  43.4045.16
zirconium oxide*- order no. -  43.4050.27


*Please note: Crushing jaws and lateral support walls made of zirconium oxide* are only suitable for crushing ceramic materials, minerals etc. and never for hard-tough samples such as metals.


Сертификация

Документация IQ/OQ для самостоятельного выполнения для поддержки квалификации устройства в системе управления качеством для Щековые дробилки PULVERISETTE 1 premium line.

ВЫБЕРИТЕ СЕРТИФИКАЦИЮ

Сертификация

IQ/OQ documentation (questionnaire format - implementation not included)
№ 96.0340.00
IQ/OQ documentation (questionnaire format - implementation by customer)

IQ/OQ documentation (questionnaire format - implementation by customer) for the independent utilization for the support of instrument qualification in the quality management system for the Jaw Crusher PULVERISETTE 1 premium line.


ВЫТЯЖНОЕ УСТРОЙСТВО

Мы предлагаем идеальную вытяжку для пыли с интегрированными каналами для свободной от пыли работы - пылесос просто подсоединяется и управляется кнопкой Старт и Стоп на дробилке, кнопка светится зеленым цветом, когда пылесос готов к работе.

Выберите вытяжное устройство и принадлежности

ВЫТЯЖНОЕ УСТРОЙСТВО

dust exhaust system, dust category „M” according to DIN EN 60335-2-69
№ 43.9070.00
Exhaust system, dust category "M" according to DIN EN 60335-2-69

The exhaust system, dust category "M" according to DIN EN 60335-2-69 for 230 V/1~, 50/60 Hz, 1000 Watt is versatile:


For combination with the high performance and small volume cyclones.
To operate the FRITSCH Cyclones you need an exhaust system. The strong airflow ensures simple feeding, increases throughput, and reduces the thermal load of the samples. The high performance and small volume Cyclone separator can be combined with Universal-Cutting Mill PULVERISETTE 19, the Variable Speed Rotor Mill PULVERISETTE premium line and classic line even passive – without sample exhaust.


For cooling of the Variable Speed Rotor Mill PULVERISETTE 14 premium line
By connecting the exhaust system with the connecting piece order no. 14.4214.00, the cooling of the mill can easily be enhanced.


For combination with the Jaw Crusher PULVERISETTE 1 premium line
The exhaust system is simply connected and operated via a start and stop button on the instrument – perfect dust exhaust due to integrated dust exhaust channels for dust free operation.


For connecting to Disk Mill PULVERISETTE 13 premium line
The exhaust is simply connected to the PULVERISETTE 13 premium line and operated via a start and stop button on the instrument – for dust free comminution.


For connecting to the Jaw Crusher PULVERISETTE 1, Modell I + II classic line
Simply connect the exhaust system to the integrated connection of the PULVERISETTE 1. Fine dust arising during comminution is automatically removed. The exhaust system is also very useful when cleaning the grinding parts.


For connecting to the Disk Mill PULVERISETTE 13 classic line
Optionally, the exhaust system can be combined with the connecting piece order no. 13.1450.00, to the PULVERISETTE 13 classic line. Fine dust arising during comminution is automatically removed. The exhaust system is also very useful when cleaning the grinding parts.


fleece filter bag for exhaust system (pack = 5 pieces)
№ 43.9055.00

1 pack = 5 pieces
One pack is included in the scope of delivery of the exhaust system (article No. 43.9070.00).
These fleece filter bags should be used for the vacuuming off of fine, dry materials.
For the vacuuming off of coarse, wet materials are plastic bags available (article no. 43.9052.00).


plastic bag for exhaust system (pack = 5 pieces)
№ 43.9052.00

1 pack = 5 pieces

One pack is included in the order of the exhaust system (article No. 43.9070.00).
These plastic bags should be used for the vacuuming off of coarse, wet materials.
For the vacuuming off of fine, dry materials are paper filter bags available (article no. 43.9055.00).


ПРИНАДЛЕЖНОСТИ ДЛЯ НЕПРЕРЫВНОГО РЕЖИМА РАБОТЫ

Для очень быстрого непрерывного предварительного и тонкого premium-измельчения, прежде всего, большого количества материала мы комбинируем щековую дробилку PULVERISETTE 1 premium line и дисковую мельницу PULVERISETTE 13 premium line в один эффективный, надежный измельчающий агрегат повышенной мощности с интегрированным щелевым делителем проб. Это дает вам возможность оптимальной подготовки проб с загрузочным размером до 95 мм и конечной тонкостью до 0,05 мм - все в одной рабочей операции. Комбинированный измельчительный агрегат FRITSCH premium также предлагается в варианте оснащения для предварительного и тонкого измельчения полностью без металла.

Выберите принадлежности для непрерывного режима работы

ПРИНАДЛЕЖНОСТИ ДЛЯ НЕПРЕРЫВНОГО РЕЖИМА РАБОТЫ

mounting rack with integrated Riffle Sample Splitter for combined use of Jaw Crusher PULVERISETTE 1 with the Disk Mill PULVERISETTE 13
№ 43.6000.00
Mounting rack with integrated Riffle Sample Splitter for combined use of Jaw Crusher PULVERISETTE 1 with the Disk Mill PULVERISETTE 13

For especially fast continuous premium pre- and fine-grinding of large quantities of coarse material, the combination of the Jaw Crusher PULVERISETTE 1 premium line and the Disk Mill PULVERISETTE 13 premium line is the ideal solution. Together, they form an efficient, heavy-duty, high-performance grinding instrument with integrated Riffle Sample Splitter.
Giving you the full range of opportunities for optimal sample preparation with a feed size of up to 95 mm and final fineness of down to 0.05 mm.
Integrated representative sample division
After the comminution in the Jaw Crusher PULVERISETTE 1 premium line, the ground material falls directly into the Riffle Sample Splitter integrated in the collecting vessel and is automatically divided into representative samples. The division ratio can be set as desired, from 1:1 to 1:6.
Continuous Operation
Conversion kit for continuous operation of the Jaw Crusher PULVERISETTE 1 premium line  and the Disk Mill PULVERISETTE 13 premium line on request.
Select the appropriate grinding parts and the desired configuration from the options available from our accessory pages  for the:  


Jaw Crusher PULVERISETTE 1 premium line


Disk Mill PULVERISETTE 13 premium line


№ для заказа
01.2030.00
Helen Müller
FRITSCH GmbH - Milling and Sizing
Industriestrasse 8
55743 Idar-Oberstein
Телефон +49 67 84 70 0

База данных протоколов измельчения

ИСПЫТАТЬ СЕЙЧАС

БЕСПЛАТНОЕ ТЕСТОВОЕ ИЗМЕЛЬЧЕНИЕ

Пришлите нам свою пробу, и мы выполним тестовое измельчение - вы получите индивидуальный протокол измельчения.