Ротационный конусный делитель проб
LABORETTE 27
Пожалуйста, обратите внимание: Для этого делителя проб FRITSCH Вам понадобится делительная головка, предлагаемая с различными соотношениями деления (1:8,1:10,1:30) и из различных материалов.
Мы поставляем делительные головки и специальные воронки для подачи любого материала.
Стаканы для проб предлагаются в различных размерах.
Для автоматической подачи скомбинируйте Ваш ротационный конусный делитель проб с:
Вибрационный лотковый питатель FRITSCH LABORETTE 24
быстроходной роторной мельнице FRITSCH PULVERISETTE 14 CLASSIC LINE
Соотношение деления | Деление 1:8 | Деление 1:10 | Деление 1:30 |
Материалы | Полимер РОМ или алюминий | Полимер РОМ или алюминий | Полимер РОМ или алюминий с покрытием |
Количество долей | 8 | 10 | 3 |
Макс. начальный размер частиц | 10 мм | 10 мм | 2,5 мм |
Макс. количество пробы | 4 000 мл | 2 500 мл | 300 мл |
Деление в сухой/жидкой среде | в сухой/жидкой среде | в сухой/жидкой среде | в сухой/жидкой среде |
Полезный объем стаканов для проб | 32, 250, 500 мл | 32, 250 мл | 15, 20, 30 мл |
Резьба стакана GL 55, другие резьбы для Ваших собственных стаканов для проб по запросу.
Предлагаются делительные головки с соотношением деления 1:8; 1:10 или 1:30 из прочного полимера полиоксиметилен (POM). Для материалов и суспензий с абразивными свойствами используются делительные головки 1:8 и 1:10 из анодированного алюминия. Для особенно агрессивных твердых веществ и суспензий имеется делительная головка 1:30 с покрытием PTFE.
POM plastic is recommended for the division of materials and suspensions, which don't produce abrasion at the surface.
Division ratio: 1:8
Number of possible sub-samples: 8
Max. permissible particle size: 10 mm
Max. feed volume: 4,000 ml
Division: dry/wet
Capacity of sample bottles: 32, 250, 500 ml (thread of glass bottles: GL55)
Equipment: The dividing head is delivered with 8 samples bottles 500 ml with screw lid and funnel 10 mm dia. as standard (included in the price of the dividing head).
This dividing head is also available in anodized aluminium (article no. 27.1150.00) for the division of materials and suspensions, which produce abrasion at the surface.
General specifications | |
Material | POM Polyoxymethylene |
ISO/EN/DIN Code | DIN 7728 C9021 |
Chemical composition | |
Element | Formula |
Polyoxmethylenecopolymer (Polyacetale) | CxH2xOx |
Melting point | 165° C |
max. Application temp. constant | 90° |
max. Application temp. briefly | 140° |
Chemical Resistance | |
Aliphatical hydrocarbon | |
Aromatical hydrocarbon | |
Halogenised hydrocarbon | |
weak acid | |
strong alkaline solution |
Physical and mechanical properties | |
Density | 141,g /cm³ |
Hardness | extremely hard |
Anodized aluminium is recommended for the division of materials and suspensions, which produce abrasion at the surface.
Division ratio: 1:8
Number of possible sub-samples: 8
Max. permissible particle size: 10 mm
Max. feed volume: 4,000 ml
Division: dry/wet
Capacity of sample bottles: 32, 250, 500 ml (thread of glass bottles: GL55)
Equipment: The dividing head is delivered with 8 samples bottles 500 ml with screw lid and funnel 10 mm dia. as standard (included in the price of the dividing head).
This dividing head is also available in POM plastic (article no. 27.1300.00) for the division of materials and suspensions, which don't produce abrasion at the surface.
General specifications | |
Material | Aluminium AlMgSi 0,5 |
ISO/EN/DIN Code | 3.3206 /1725 |
Chemical composition | |
Element | Share % | Iron – Fe | 0.1-03 |
Zinc - Zn | 0.15 |
Silicon – Si | 0.3-0.6 |
Manganese – Mn | 0.1 |
Copper– Cu | 0.1 |
Manganese – Mg | 0.35 - 0.60 |
Chromium – Cr | 0.05 |
Titan – Ti + Zr Circonium | 0.1 |
Physical and mechanical properties | |
Density | 2.7 g/cm³ |
Hardness | 65 HBW |
POM plastic is recommended for the division of materials and suspensions, which don't produce abrasion at the surface.
Division ratio: 1:10
Number of possible sub-samples: 10 Max.
Permissible particle size: 10 mm
Max. feed volume: 2,500 ml
Division: dry/wet
Capacity of sample bottles: 32, 250 ml (thread of glass bottles: GL55)
Equipment: The dividing head is delivered with 10 samples bottles 250 ml with screw lid and funnel 10 mm dia. as standard (included in the price of the dividing head).
This dividing head is also available in anodized aluminium (article no. 27.4150.00) for the division of materials and suspensions, which produce abrasion at the surface.
General specifications | |
Material | POM Polyoxymethylene |
ISO/EN/DIN Code | DIN 7728 C9021 |
Chemical composition | |
Element | Formula |
Polyoxmethylenecopolymer (Polyacetale) | CxH2xOx |
Melting point | 165° C |
max. Application temp. constant | 90° |
max. Application temp. briefly | 140° |
Chemical Resistance | |
Aliphatical hydrocarbon | |
Aromatical hydrocarbon | |
Halogenised hydrocarbon | |
weak acid | |
strong alkaline solution |
Physical and mechanical properties | |
Density | 141,g /cm³ |
Hardness | extremely hard |
Anodized aluminium is recommended for the division of materials and suspensions, which produce abrasion at the surface.
Division ratio: 1:10
Number of possible sub-samples: 10
Max. permissible particle size: 10 mm
Max. feed volume: 2,500 ml
Division: dry/wet
Capacity of sample bottles: 32, 250 ml (thread of glass bottles: GL55)
Equipment: The dividing head is delivered with 10 samples bottles 250 ml with screw lid and funnel 10 mm dia. as standard (included in the price of the dividing head).
This dividing head is also available in POM plastic (article no. 27.5150.00) for the division of materials and suspensions, which don't produce abrasion at the surface.
General specifications | |
Material | Aluminium AlMgSi 0,5 |
ISO/EN/DIN Code | 3.3206 /1725 |
Chemical composition | |
Element | Share % | Iron – Fe | 0.1-03 |
Zinc - Zn | 0.15 |
Silicon – Si | 0.3-0.6 |
Manganese – Mn | 0.1 |
Copper– Cu | 0.1 |
Manganese – Mg | 0.35 - 0.60 |
Chromium – Cr | 0.05 |
Titan – Ti + Zr Circonium | 0.1 |
Physical and mechanical properties | |
Density | 2.7 g/cm³ |
Hardness | 65 HBW |
POM plastic is recommended for the division of materials and suspensions, which don't produce abrasion at the surface.
Division ratio: 1:30
Number of possible sub-samples: 3
Max. permissible particle size: 2.5 mm
Max. feed volume: 300 ml
Division: dry/wet
Capacity of sample bottles: 15, 20, 30 ml
Equipment: The dividing head is delivered with 3 samples bottles 15 ml with screw lid and funnel 10 mm dia. as well as 1 funnel each of 5 mm dia. for dry- resp. wet division as standard (included in the price of the dividing head).
This dividing head is also available in PTFE coated aluminium (article no. 27.2150.00) for the division of aggressive materials and suspensions, which attack POM plastic and aluminium.
General specifications | |
Material | POM Polyoxymethylene |
ISO/EN/DIN Code | DIN 7728 C9021 |
Chemical composition | |
Element | Formula |
Polyoxmethylenecopolymer (Polyacetale) | CxH2xOx |
Melting point | 165° C |
max. Application temp. constant | 90° |
max. Application temp. briefly | 140° |
Chemical Resistance | |
Aliphatical hydrocarbon | |
Aromatical hydrocarbon | |
Halogenised hydrocarbon | |
weak acid | |
strong alkaline solution |
Physical and mechanical properties | |
Density | 141,g /cm³ |
Hardness | extremely hard |
PTFE coated aluminium is recommended for the division of aggressive materials and suspensions, which attack POM plastic and aluminium.
Division ratio: 1:30
Number of possible sub-samples: 3
Max. permissible particle size: 2.5 mm
Max. feed volume: 300 ml
Division: dry/wet
Capacity of sample bottles: 15, 20, 30 ml
Equipment: This dividing head is delivered with 3 samples bottles 15 ml with screw lid and funnel 10 mm dia. as well as 1 funnel each of 5 mm dia. for dry- resp. wet division as standard (included in the price of the dividing head).
This dividing head is also available in POM plastics (article no. 27.6150.00) for the division of materials and suspensions, which don't produce abrasion at the surface.
General specifications | |
Material | PTFE |
CAS Number | 9002-84-0 |
Chemical composition | |
Element | Formula |
Polytetrafluoroethylene | C 2F4 |
Melting point | 327° C |
Max. application temp. constant | 260° C |
Max. application temp. briefly | 300° C |
Physical and mechanical properties | |
Density | 2.16 g /cm³ |
Ball pressure hardness | ISO 868, ISO 2039-2, D 55 Shore |
Division ratio: 1:30
Number of possible sub-samples: 30
Max. permissible particle size: 2.5 mm
Max. feed volume: 300 ml
Division: dry/wet
Capacity of sample bottles: 15, 20, 30 ml
Equipment: The dividing head is delivered with 3 samples bottles 15 ml with screw lid and funnel 10 mm dia. as well as 1 funnel each of 5 mm dia. for dry- resp. wet division as standard (included in the price of the dividing head).
Стаканы для проб предлагаются в различных размерах от 15 мл до 500 мл. Также поставляются специально разработанные полимерные вставки с объемом 32 мл для применения в 250 мл и 500 мл стаканах для проб для минимальных количеств.
Sample bottle with screw lid, thread of sample bottle GL55, sample bottle can be used with dividing heads, division ratio 1:8 and 1:10.
Furthermore a sample vessel 32 ml with lid, article-number 83.3190.16, is available, which can be inserted in the sample bottles 250 ml and 500 ml for dividing smallest sample quantities.
The sample glass is recommended for sample exhaustion with the small volume Cyclone separator for sample discharges smaller than 500 ml, since only a 500 ml sample glass is included in the delivery of the small volume performance Cyclone separator.
Sample bottle with screw lid, thread of sample bottle GL55.
Sample bottle can be used with dividing heads, division ratio 1:8.
Furthermore a sample vessel 32 ml with lid, article-number 83.3190.16, is available, which can be inserted in the sample bottles 250 ml and 500 ml for dividing smallest sample quantities.
Sample glass can also be used for sample exhaustion with the small volume Cyclone separator.
Sample vessel 32 ml with lid for sample bottle 250 ml and 500 ml.
For dividing smallest sample quantities, this sample vessel 32 ml can be inserted in the sample bottles 250 ml (article-number 27.1450.00) and sample bottles 500 ml (article-number 27.1460.00).
Sample bottle with lid can be used with the dividing heads with division ratio 1:30.
Sample bottle with lid can be used with the dividing heads with division ratio 1:30.
Sample bottle with lid can be used with dividing heads, division ratio 1:30.
Sample tube made of PS (Polystyrene) 5 ml (division ratio 1:30 - 30 subsamples)
Каждая делительная головка LABORETTE 27 поставляется с воронкой с диаметром 10 мм, делительные головки с соотношением деления 1:30 дополнительно с воронкой 5 мм. Помимо этого есть воронки с диаметром 15 мм и 22 мм для оптимальной адаптации к соответствующему размеру частиц и специальные воронки для жидкостей.
The funnel is also offered in 10, 15 and 22 mm dia. to suit the particle size of the sample being divided.
For the division of suspensions with dividing head, division ratio 1:30 a separate funnel, order no. 27.1330.16 is offered
For the division of suspensions with dividing head, division ratio 1:30
The funnel is also offered in 5, 10 and 15, 22 mm dia. to suit the particle size of the sample being divided.
The funnel is also offered in 5, 15 and 22 mm dia. to suit the particle size of the sample being divided.
The funnel is also offered in 5, 10 and 22 mm dia. to suit the particle size of the sample being divided.
The funnel is also offered in 5, 10 and 15 mm dia. to suit the particle size of the sample being divided.
Защитное устройство, предотвращающее прямой контакт с вращающейся делительной головкой. Для Ротационного конусного делителя проб предлагаются асессуары для автоматической подачи пробы, а также его сертификация
Made of colourless polyacryl, prevents direct contact with the turning dividing head.
IQ/OQ documentation (questionnaire format - implementation by customer) for the independent utilization for the support of instrument qualification in the quality management system for the Rotary Cone Sample Divider PULVERISETTE 27.
Vibratory Feeder LABORETTE 24 with V-shaped channel, funnel and control unit for 200-240 V/1~, 50-60 Hz, 25 Watt.
Details Vibratory Feeder LABORETTE 24
Vibratory Feeder LABORETTE 24 with V-shaped channel, funnel and control unit for 100-120 V/1~, 50-60 Hz, 25 Watt.
Details Vibratory Feeder LABORETTE 24
solid stand - height adjustable, rotatable, stable
IQ/OQ documentation (questionnaire format - implementation by customer) for the independent utilization for the support of instrument qualification in the quality management system for the Vibratory Feeder LABORETTE 24.