Другие Дисковые мельницы

 
 

ДРУГИЕ ГРУППЫ ИЗДЕЛИЙ

 
 

Дисковая вибрационная мельница

PULVERISETTE 9

№ для заказа
09.5000.00
Принадлежности

Пожалуйста, обратите внимание: В стандартной комплектации дисковая вибрационная мельница PULVERISETTE 9 поставляется без размольных гарнитуров. Размольные гарнитуры предлагаются из 5 разных материалов и в 3 различных размерах с емкостью от 50 мл до 250 мл и могут быть заказаны как принадлежности.
FRITSCH также предлагает для PULVERISETTE 9 крепкие ролики с блокирующим тормозом.
Также поставляется практичный гидравлический таблеточный пресс с ручным управлением и усилием прессования 250 кН.

РАЗМОЛЬНЫЕ ГАРНИТУРЫ

Руководство по выбору
 
  • Измельчающее тело и объемы

    Объем Полезный объем (измельчаемый материал) Измельчающее тело
    50 мл 10 - 50 мл 1 сердечник
    100 мл 30 - 100 мл 1 сердечник + 1 кольцо
    250 мл 75 - 250 мл 1 сердечник + 1 кольцо
  • Данные по материалам размольных гарнитуров

    Материал Основной компонент материала Плотность г/см³ Износостойкость Применение для измельчаемого материала
    закаленная нержавеющая сталь Fe - Cr 7,7 хорошо хрупкие, твердые пробы
    несодержащая хром инструментальная сталь Fe 7,8 условно хорошо хрупкие, твердые пробы
    Твердый сплав карбид вольфрама WC 14,3 очень хорошо очень твердые, абразивные пробы
    Агат SiO2 2,65 хорошо мягкие до среднетвердых, хрупкие волокнистые пробы
    Оксид циркония ZrO2 5,7 хорошо среднетвердые, хрупкие, волокнистые пробы, измельчение без металла

Выберите как минимум один размольный гарнитур. Размольные гарнитуры предлагаются из 5 разных материалов и в 3 различных размерах с емкостью от 50 мл до 250 мл. Материал размольного гарнитура должен при этом быть тверже, чем измельчаемый материал.

Выберите размольный гарнитур

РАЗМОЛЬНЫЕ ГАРНИТУРЫ

hardened, stainless steel - Fe - Cr - useful volume 250 ml
№ 48.5125.00
Grinding set hardened, stainless steel, useful volume 250 ml

For the comminution of brittle, hard samples.
General material specification:
Material: hardened, stainless steel - 1.4125
Abrasion resistance: good
Suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis.


Our suggestion: Grinding sets with high density, e.g. hardened, stainless steel or tungsten carbide, shorten the grinding time.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
Materialhardened stainless steel – 1.4125
ISO/EN/DIN codeX105CrMo17
Chemical composition
ElementShare %
Iron– Fe81.4
Chromium – Cr17
Carbon – C1.1
Molybdenum – Mo0.5
Physical and mechanical properties
Density 7.7 kg/dm³
Hardness~ 60 HRC


Explanations on hardness data
hardened, stainless steel - Fe - Cr - useful volume 100 ml
№ 48.5110.00
Grinding set hardened, stainless steel, useful volume 100 ml

For the comminution of brittle, hard samples.
General material specification:
Material: hardened, stainless steel - 1.4125
Abrasion resistance: good
Suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis.


Our suggestion: Grinding sets with high density, e.g. hardened, stainless steel or tungsten carbide, shorten the grinding time.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
Materialhardened stainless steel – 1.4125
ISO/EN/DIN codeX105CrMo17
Chemical composition
ElementShare %
Iron– Fe81.4
Chromium – Cr17
Carbon – C1.1
Molybdenum – Mo0.5
Physical and mechanical properties
Density 7.7 kg/dm³
Hardness~ 60 HRC


Explanations on hardness data
hardened, stainless steel - Fe - Cr - useful volume 50 ml
№ 48.5105.00
Grinding set hardened, stainless steel, useful volume 50 ml

For the comminution of brittle, hard samples.
General material specification:
Material: hardened, stainless steel - 1.4125
Abrasion resistance: good
Suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis.


Our suggestion: Grinding sets with high density, e.g. hardened, stainless steel or tungsten carbide, shorten the grinding time.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
Materialhardened stainless steel – 1.4125
ISO/EN/DIN codeX105CrMo17
Chemical composition
ElementShare %
Iron– Fe81.4
Chromium – Cr17
Carbon – C1.1
Molybdenum – Mo0.5
Physical and mechanical properties
Density 7.7 kg/dm³
Hardness~ 60 HRC


Explanations on hardness data
chromium-free tool steel - Fe - useful volume 250 ml
№ 48.5525.00
Grinding set chromium-free tool steel, useful volume 250 ml

For the comminution of brittle, hard samples


General material specification:
Material: chromium-free tool steel -1.1740
Abrasion resistance: fairly good
Suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis


Our suggestion: Grinding sets with high density, e.g. tempered steel or tungsten carbide, shorten the grinding time


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialChromium-free tool steel – 1.1740
ISO/EN/DIN codeC60W3
Chemical composition
ElementShare %
Iron – Fe98.63 – 98.08
Carbon – C0.55 – 0.65
Silicon – Si0.15 – 0.4
Manganese – Mn0.6 – 0.8
Phosphorus – P< 0.035
Sulphur – S< 0.035
Physical and mechanical properties
Density7.8 g/cm³
Hardness50 - 55 HRC


Explanations on hardness data
chromium-free tool steel - Fe - useful volume 100 ml
№ 48.5510.00
Grinding set chromium-free tool steel, useful volume 100 ml

For the comminution of brittle, hard samples


General material specification:
Material: chromium-free tool steel -  1.1740
Abrasion resistance: fairly good
Suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis


Our suggestion: Grinding sets with high density, e.g. tempered steel or tungsten carbide, shorten the grinding time.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialChromium-free tool steel – 1.1740
ISO/EN/DIN codeC60W3
Chemical composition
ElementShare %
Iron – Fe98.63 – 98.08
Carbon – C0.55 – 0.65
Silicon – Si0.15 – 0.4
Manganese – Mn0.6 – 0.8
Phosphorus – P< 0.035
Sulphur – S< 0.035
Physical and mechanical properties
Density7.8 g/cm³
Hardness50 - 55 HRC


Explanations on hardness data
chromium-free tool steel - Fe - useful volume 50 ml
№ 48.5505.00
Grinding set chromium-free tool steel, useful volume 50 ml

For the comminution of brittle, hard samples


General material specification:
Material: chromium-free tool steel -  1.1740
Abrasion resistance: fairly good
Suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis


Our suggestion: Grinding sets with high density, e.g. tempered steel or tungsten carbide, shorten the grinding time.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialChromium-free tool steel – 1.1740
ISO/EN/DIN codeC60W3
Chemical composition
ElementShare %
Iron – Fe98.63 – 98.08
Carbon – C0.55 – 0.65
Silicon – Si0.15 – 0.4
Manganese – Mn0.6 – 0.8
Phosphorus – P< 0.035
Sulphur – S< 0.035
Physical and mechanical properties
Density7.8 g/cm³
Hardness50 - 55 HRC


Explanations on hardness data
hardmetal tungsten carbide - WC - useful volume 250 ml
№ 48.5225.00
Grinding set hardmetal tungsten carbide, useful volume 250 ml

For the comminution of very hard, abrasive  samples

General material specification:
Material:hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: very hard, abrasive samples
Detailed information about the material you will find in the element analysis.


Our suggestion: Grinding sets with high density, e.g. tempered steel or tungsten carbide, shorten the grinding time.


 


 


 


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialTungsten carbide - WC
ISO/EN/DIN code
Chemical composition
ElementShare %
Tungsten carbide – TC88
Cobalt – Co 12
Physical and mechanical properties
Density14.3 g/cm³
Hardness89.7 HRA


Explanations on hardness data
hardmetal tungsten carbide - WC - useful volume 100 ml
№ 48.5210.00
Grinding set hardmetal tungsten carbide, useful volume 100 ml

For the comminution of very hard, abrasive  samples


General material specification:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: very hard, abrasive samples
Detailed information about the material you will find in the element analysis.


Our suggestion: Grinding sets with high density, e.g. tempered steel or tungsten carbide, shorten the grinding time.
 


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialTungsten carbide - WC
ISO/EN/DIN code
Chemical composition
ElementShare %
Tungsten carbide – TC88
Cobalt – Co 12
Physical and mechanical properties
Density14.3 g/cm³
Hardness89.7 HRA


Explanations on hardness data
hardmetal tungsten carbide - WC - useful volume 50 ml
№ 48.5205.00
Grinding set hardmetal tungsten carbide, useful volume 50 ml

For the comminution of very hard, abrasive  samples

General material specification:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: very hard, abrasive samples
Detailed information about the material you will find in the element analysis.


Our suggestion: Grinding sets with high density, e.g. tempered steel or tungsten carbide, shorten the grinding time.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialTungsten carbide - WC
ISO/EN/DIN code
Chemical composition
ElementShare %
Tungsten carbide – TC88
Cobalt – Co 12
Physical and mechanical properties
Density14.3 g/cm³
Hardness89.7 HRA


Explanations on hardness data
agate - SiO2 - useful volume 100 ml
№ 48.5310.00
Grinding set agate, useful volume 100 ml

for comminution of soft to medium-hard, brittle, fibrous samples

General material specification:
Material: agate - SiO2
Abrasion resistance: good
Suitable for: soft, medium-hard, brittle, fibrous samples
Detailed information about the material you will find in the element analysis.


Our suggestion: Grinding sets with high density, e.g. tempered steel or tungsten carbide, shorten the grinding time.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialAgate – SiO2
Chemical composition
ElementShare %
Silicon oxide– SiO299.9
Aluminium – Al2O3< 0.02
Iron oxide – Fe2O3< 0.02
Calcium oxide – CaO< 0.02
Magnesium oxide – MgO< 0.02
Sodium oxide – Na2O< 0.02
Potassium oxide – K2O< 0.02
Manganese oxide – MnO< 0.02
Physical and mechanical properties
Density2.65 g/cm³
Hardness6.5 – 7 Mohs


Explanations on hardness data
agate - SiO2 - useful volume 50 ml
№ 48.5305.00
Grinding set agate, useful volume 50 ml

for comminution of soft to medium-hard, brittle, fibrous samples


General material specification:
Material: agate - SiO2
Abrasion resistance: good
Suitable for: soft, medium-hard, brittle, fibrous samples
Detailed information about the material you will find in the element analysis.


Our suggestion: Grinding sets with high density, e.g. tempered steel or tungsten carbide, shorten the grinding time.


 


 


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialAgate – SiO2
Chemical composition
ElementShare %
Silicon oxide– SiO299.9
Aluminium – Al2O3< 0.02
Iron oxide – Fe2O3< 0.02
Calcium oxide – CaO< 0.02
Magnesium oxide – MgO< 0.02
Sodium oxide – Na2O< 0.02
Potassium oxide – K2O< 0.02
Manganese oxide – MnO< 0.02
Physical and mechanical properties
Density2.65 g/cm³
Hardness6.5 – 7 Mohs


Explanations on hardness data
zirconium oxide - ZrO2 -, useful volume 100 ml
№ 48.5410.00
Grinding set zirconium oxide, useful volume 100 ml

for comminution of medium-hard, brittle, fibrous samples and for metal-free grinding


General material specification:
Material: zirconium oxide - ZrO2
Abrasion resistance: good
Suitable for: medium-hard, brittle, fibrous samples,  metal-free grinding
Detailed information about the material you will find in the element analysis.


Grinding sets of zirconium oxide are only suitable for grinding ceramic materials, minerals etc and never for hard-tough samples, such as metals.


Our suggestion: Grinding sets with high density, e.g. tempered steel or tungsten carbide, shorten the grinding time.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialZirconium oxide - ZrO2
Chemical composition
ElementShare %
Zirconium oxide – ZrO294.2 - 95.2
Hafnium oxide – HfO21 - 2
Magnesium oxide – MgO3.5
Silicon dioxide – SiO20.1
Aluminium oxide – Al2O30.1
Other0.1
Physical and mechanical properties
Density5.7 g/cm³
Hardness Vickers 1200 (HV10)


Explanations on hardness data
zirconium oxide - ZrO2 -, useful volume 50 ml
№ 48.5405.00
Grinding set zirconium oxide, useful volume 50 ml

for comminution of medium-hard, brittle, fibrous samples and for metal-free grinding


General material specification:
Material: zirconium oxide - ZrO2
Abrasion resistance: good
Suitable for: medium-hard, brittle, fibrous samples, for metal-free grinding
Detailed information about the material you will find in the element analysis.


Grinding sets of zirconium oxide are only suitable for grinding ceramic materials, minerals etc. and never for hard-tough samples, such as metals.


Our suggestion: Grinding sets with high density, e.g. tempered steel or tungsten carbide, shorten the grinding time.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialZirconium oxide – ZrO2
ISO/EN/DIN code
Chemical composition
ElementShare %
Zirconium oxide – ZrO294.5
Yttrium oxide – Y2O35.1
Si O2, CaO,MgO,Al2O3< 0.4
Physical and mechanical properties
Density6.0 g/cm³
Hardness12.5 x 10³ Nmm-² HV


Explanations on hardness data

ДОПОЛНИТЕЛЬНЫЕ ПРИНАДЛЕЖНОСТИ

Крепкие ролики с блокирующими тормозами делают PULVERISETTE 9 передвижной.

ВЫБЕРИТЕ ДОПОЛНИТЕЛЬНЫЕ ПРИНАДЛЕЖНОСТИ

РОЛИКИ ДЛЯ ДИСКОВОЙ ВИБРАЦИОННОЙ МЕЛЬНИЦЫ

wheels for Vibrating Cup Mill
№ 93.4365.00
Wheels for Vibrating Cup Mill

Go mobile with the Vibrating Cup Mill: Order
- robust wheels with arresting brake for your Vibrating Cup Mill
- 1 Set includes 4 heavy-duty wheels, 2 with arresting brake


Сертификация

IQ/OQ documentation (questionnaire format - implementation not included)
№ 96.0300.00
IQ/OQ documentation (questionnaire format - implementation by customer)

IQ/OQ documentation (questionnaire format - implementation by customer) for the independent utilization for the support of instrument qualification in the quality management system for the Vibrating Cup Mill PULVERISETTE 9.


ТАБЛЕТОЧНЫЙ ПРЕСС

Идеален для высококачественных пресс-изделий. При помощи гидравлического таблеточного пресса с ручным управлением можно быстро и просто перерабатывать твердые пробы в стабильные и одновременно высоко-прозрачные для рентгенофлуоресцентного анализа или ИК-спектроскопии пресс-изделия.

ВЫБЕРИТЕ ТАБЛЕТОЧНЫЙ ПРЕСС И ПРЕССОВОЧНЫЙ ИНCТРУМЕНТ

ТАБЛЕТОЧНЫЙ ПРЕСС

pellet press - manual instrument without pressing tool
№ 09.9510.00
Pellet Press - manual instrument without pressing tool

Ideal for high-quality pellets

The manually-operated hydraulic FRITSCH Pellet Press is ideal for fast and easy preparation of both: solid and highly permeable pellets of solid samples for X-ray fluorescence analysis or infrared spectroscopy. It's as easy as this: Fill in the sample, close the magnetically-held door and build-up the desired pressure using the hand lever - that's it. The pressure force is variable up to max. 250 kN and is automatically relieved in case of overstress. If your pellets require binding agents for stabilisation, please contact us and we will be happy to assist.
The pressing tools are not included with the pellet press and the following pressing tools are available:
Order no: 09.8040.00 - pressing tool for pellets with 40 mm dia.
Order no: 09.8032.00 - pressing tool for pellets with 32 mm dia.


Further pressing tools and automatic pellet presses with a pressure force of 400 kN can be delivered on request.


ПРЕССОВОЧНЫЙ ИНCТРУМЕНТ для ТАБЛЕТОЧНЫЙ ПРЕСС 09.9510.00

pressing tool for pellets with 40 mm diameter
№ 09.8040.00

Pressing tool for pellets with 40 mm diameter:
If your pellets require binding agents for stabilisation, please contact us and we will be happy to assist.


Further pressing tools on request!


pressing tool for pellets with 32 mm diameter
№ 09.8032.00

Pressing tool for pellets with 32 mm diameter.
If your pellets require binding agents for stabilisation, please contact us and we will be happy to assist.


Further pressing tools on request!


№ для заказа
09.5000.00
Helen Müller
FRITSCH GmbH - Milling and Sizing
Industriestrasse 8
55743 Idar-Oberstein
Телефон +49 67 84 70 0

База данных протоколов измельчения

ИСПЫТАТЬ СЕЙЧАС

БЕСПЛАТНОЕ ТЕСТОВОЕ ИЗМЕЛЬЧЕНИЕ

Пришлите нам свою пробу, и мы выполним тестовое измельчение - вы получите индивидуальный протокол измельчения.