ДРУГИЕ ГРУППЫ ИЗДЕЛИЙ

 
 

Мощный аналитический грохот

ANALYSETTE 18

№ для заказа
18.3020.00
Принадлежности

В стандартный комплект поставки мощного аналитического грохота ANALYSETTE 18 входят крепление, натяжная крышка сита для рассева в сухой среде и ПО AUTOSIEVE (тестовая лицензия на 90 дней).

Пожалуйста, обратите внимание: Для этого аналитического грохота Вам понадобятся еще аналитические сита и поддон сита.

Принадлежности для аналитических сит 400 мм Ø

У нас Вы найдете именно те принадлежности, которые Вам нужны для рассева: поддон сита, промежуточный поддон сита, комплект переналадки для рассева в жидкой среде и запасное уплотнительное кольцо.

Выберите принадлежности для аналитических сит 400 мм Ø

Принадлежности для аналитических сит 400 мм Ø

sieve pan made of stainless steel 400 mm dia.
№ 37.1000.01
Sieve pan made of stainless steel 400 mm dia.

For dry sieving with test sieves 400 mm diameter.

The sieve pan made of stainless steel completes the sieve stack.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
interposed sieve pan made of stainless steel 400 mm dia.
№ 37.1100.01
Interposed sieve pan made of stainless steel 400 mm dia.

For dry sieving with test sieves 400 mm diameter.


If several sieving operations should be carried out simultaneously, an interposed sieve pan must be used as sieve pan between the sieves.


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
conversion kit for wet sieving
№ 18.3048.00
conversion kit for wet sieving

Consisting of clamping lid with wide spreading spray diffuser, sieve pan with outlet made of stainless steel 400 mm dia. and PVC-hose.


Venting ring for test sieves 400 mm dia.
№ 31.1350.02
Venting ring for test sieves

Venting ring for test sieves 400 mm dia. - required when utilizing test sieves < 100 µm. Venting rings are used to prevent the occurrence of air cushions during wet sieving.


replacement seal ring NBR for test sieves 400 mm dia.
№ 37.0010.16
Replacement seal ring NBR

replacement seal ring NBR for test sieves 400 mm dia.


Принадлежности для аналитических сит 200 мм Ø

Для использования сит диаметром 200 мм и 8" предлагается специальный переходник.

ВЫБЕРИТЕ ПРИНАДЛЕЖНОСТИ ДЛЯ АНАЛИТИЧЕСКИХ СИТ

Принадлежности для аналитических сит 200 мм Ø

adapter polyamide
№ 18.3051.00

adapter polyamide for clamping lid for dry sieving with test sieves 200 mm/8" dia.


Принадлежности для автоматического ситового анализа

Мультиязыковое программное обеспечение AUTOSIEVE для управления ANALYSETTE 18 и для автоматического анализа, простого контроля и документации Ваших результатов рассева.

Выберите принадлежности для автоматического ситового анализа

Принадлежности для автоматического ситового анализа

Software AUTOSIEVE-activation
№ 03.2902.00
Software AUTOSIEVE for Windows for control and automatic evaluation of sieve analysis (price for software activation)

Software activation after expiration of the free of charge test phase for FRITSCH software AUTOSIEVE for Windows.


System requirements - Software AUTOSIEVE
Minimum software requirements: Windows 7 or higher
Minimum hardware requirements: standard WINDOWS ™ PC with at least 2 Gbyte RAM


Your advantages with AUTOSIEVE:

  • Automatic evaluation of your sieve Analysis
  • Simple monitoring and documentation of your sieving results
  • Suitable for all FRITSCH Sieve Shakers: Vibratory Sieve Shakers ANALYSETTE 3 PRO and ANALYSETTE 3 SPARTAN and the Heavy Duty Analytical Sieve Shaker ANALYSETTE 18
  • After conducting your sieving– simply connect the laboratory analysis balance, then weigh the sieves before and after sieving using differential weighing – AUTOSIEVE will do the rest
  • Extensive presentation of the results: presentation and printout as cumulative or frequency distribution and as graphs according to DIN ISO 9276-1
  • Controlling of the Vibratory Sieve Shaker ANALYSETTE 3 PRO and entry of all functions such as amplitude, sieving time, interval operation and the type of sieving comfortable via the computer
  • Monitoring of the sieving via the online-comparison of the set and actual amplitude and therefore an auto validation of the sieving process with the Vibratory Sieve Shaker ANALYSETTE 3 PRO

FRITSCH offers for the differential weighing of the sieves a special laboratory analysis balance for the Vibratory Sieve Shakers ANALYSETTE 3 PRO and SPARTAN, which you can order with the following order no. 03.2600.00.
A laboratory analysis balance for the Heavy Duty Analytical Sieve Shaker ANALYSETTE 18 is available on request.


Приспособление для очистки отверстий сита

Для рассева мелкозернистого материала или агломератов имеет смысл применять, например, вулколановые кубики. Эффективный рассев больших количеств.

Выберите приспособление для очистки отверстий сита

Приспособление для очистки отверстий сита

1 vulkollan cube (10 cubes per sieve)
№ 37.0200.16
Vulkollan cube

1 vulkollan cube.


For sieving of fine-grained materials or agglomerates, the use of these vulkollan cubes is recommended.


Recommended quantity per sieve: minimum 10 cubes per sieve.


АНАЛИТИЧЕСКИЕ СИТА ИЗ НЕРЖАВЕЮЩЕЙ СТАЛИ, 400 ММ Ø, 65 ММ ВЫСОТА СОГЛАСНО ISO 3310-1

Для и рассева в сухой и жидкой среде с размерами ячеек от 20 мкм до 125 мм: особенно легкие, прочные и качественно изготовленные. Высоколегированная нержавеющая сталь защищает от коррозии и упрощает очистку. Переходы сетки без канавок предотвращают загрязнение просеиваемого материала. Каждое сито имеет лазерную гравировку, оптически измерено и поставляется с заводской справкой.

 

 

ВЫБЕРИТЕ АНАЛИТИЧЕСКИЕ СИТА

АНАЛИТИЧЕСКИЕ СИТА ИЗ НЕРЖАВЕЮЩЕЙ СТАЛИ, 400 ММ Ø, 65 ММ ВЫСОТА СОГЛАСНО ASTM E-11-1995

125 mm mesh width
№ 34.0040.02
Test sieve, mesh width 125 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
100 mm mesh width
№ 34.0050.02
Test sieve, mesh width 1oo mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
90 mm mesh width
№ 34.0060.02
Test sieve, mesh width 90 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
63 mm mesh width
№ 34.0000.02
Test sieve, mesh width 63 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
45 mm mesh width
№ 34.0080.02
Test sieve, mesh width 45 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
31.5 mm mesh width
№ 34.0100.02
Test sieve, mesh width 31.5 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
25 mm mesh width
№ 34.0200.02
Test sieve, mesh width 25 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
22.4 mm mesh width
№ 34.0300.02
Test sieve, mesh width 22.4 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
20 mm mesh width
№ 34.0400.02
Test sieve, mesh width 20 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
18 mm mesh width
№ 34.0600.02
Test sieve, mesh width 18 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
16 mm mesh width
№ 34.0800.02
Test sieve, mesh width 16 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
14 mm mesh width
№ 34.0900.02
Test sieve, mesh width 14 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
12.5 mm mesh width
№ 34.1000.02
Test sieve, mesh width 12.5 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
11.2 mm mesh width
№ 34.1100.02
Test sieve, mesh width 11.2 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
10 mm mesh width
№ 34.1200.02
Test sieve, mesh width 10 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
9 mm mesh width
№ 34.1300.02
Test sieve, mesh width 9 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
8 mm mesh width
№ 34.1400.02
Test sieve, mesh width 8 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
7.1 mm mesh width
№ 34.1500.02
Test sieve, mesh width 7.1 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
6.3 mm mesh width
№ 34.1600.02
Test sieve, mesh width 6.3 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
5.6 mm mesh width
№ 34.1700.02
Test sieve, mesh width 5.6 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
5 mm mesh width
№ 34.1800.02
Test sieve, mesh width 5 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
4 mm mesh width
№ 34.2000.02
Test sieve, mesh width 4 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
3.55 mm mesh width
№ 34.2100.02
Test sieve, mesh width 3.55 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
3.15 mm mesh width
№ 34.2200.02
Test sieve, mesh width 3.15

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel,with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
2.8 mm mesh width
№ 34.2300.02
Test sieve, mesh width 2.8 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
2.5 mm mesh width
№ 34.2400.02
Test sieve, mesh width 2.5 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
2 mm mesh width
№ 34.2600.02
Test sieve, mesh width 2 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
1.8 mm mesh width
№ 34.2700.02
Test sieve, mesh width 1.8 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
1.6 mm mesh width
№ 34.2800.02
Test sieve, mesh width 1.6 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
1.4 mm mesh width
№ 34.2900.02
Test sieve, mesh width 1.4 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
1.25 mm mesh width
№ 34.3000.02
Test sieve, mesh width 1.25 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
1.12 mm mesh width
№ 34.3100.02
Test sieve, mesh width 1.12 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
1 mm mesh width
№ 34.3200.02
Test sieve, mesh width 1 mm

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
900 µm mesh width
№ 34.3300.02
Test sieve, mesh width 900 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
800 µm mesh width
№ 34.3400.02
Test sieve, mesh width 800 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
710 µm mesh width
№ 34.3500.02
Test sieve, mesh width 710 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
630 µm mesh width
№ 34.3600.02
Test sieve, mesh width 630 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
560 µm mesh width
№ 34.3700.02
Test sieve, mesh width 560 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
500 µm mesh width
№ 34.3800.02
Test sieve, mesh width 500 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
450 µm mesh width
№ 34.3900.02
Test sieve, mesh width 450 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
400 µm mesh width
№ 34.4000.02
Test sieve, mesh width 400 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
355 µm mesh width
№ 34.4100.02
Test sieve, mesh width 355 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
315 µm mesh width
№ 34.4200.02
Test sieve, mesh width 315 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
280 µm mesh width
№ 34.4300.02
Test sieve, mesh width 280 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
250 µm mesh width
№ 34.4400.02
Test sieve, mesh width 250 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
224 µm mesh width
№ 34.4500.02
Test sieve, mesh width 224 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
200 µm mesh width
№ 34.4600.02
Test sieve, mesh width 200 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
180 µm mesh width
№ 34.4700.02
Test sieve, mesh width 180 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
160 µm mesh width
№ 34.4800.02
Test sieve, mesh width 160 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
140 µm mesh width
№ 34.4900.02
Test sieve, mesh width 140 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
125 µm mesh width
№ 34.5000.02
Test sieve, mesh width 125 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
112 µm mesh width
№ 34.5100.02
Test sieve, mesh width 112 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
100 µm mesh width
№ 34.5200.02
Test sieve, mesh width 100 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
90 µm mesh width
№ 34.5400.02
Test sieve, mesh width 90 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
80 µm mesh width
№ 34.5600.02
Test sieve, mesh width 80 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
71 µm mesh width
№ 34.5800.02
Test sieve, mesh width 71 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data
63 µm mesh width
№ 34.6000.02
Test sieve, mesh width 63 <span class="to-lower">µm</span>

Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mentioned mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


 


 


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4404/316L
ISO/EN/DIN codeX2CrNiMo17-12-2
Chemical composition
ElementShare %
Iron – Feapprox. 62.8
Carbon – C0.03
Silicon – Si1
Manganese – Mn2
Phosphorus – P0.045
Sulphur – S0.015
Chromium – Cr18.5
Molybdenum – Mo2.50
Nickel – Ni13.00
Nitrogen – N0.110
Physical and mechanical properties
Density8.0 g/cm³
Hardness215 HB



Explanations on hardness data

АНАЛИТИЧЕСКИЕ СИТА ИЗ НЕРЖАВЕЮЩЕЙ СТАЛИ, 400 ММ Ø, 65 ММ ВЫСОТА СОГЛАСНО ASTM E11

Для и рассева в сухой и жидкой среде с размерами ячеек от 20 мкм до 125 мм: особенно легкие, прочные и качественно изготовленные. Высоколегированная нержавеющая сталь защищает от коррозии и упрощает очистку. Переходы сетки без канавок предотвращают загрязнение просеиваемого материала. Каждое сито имеет лазерную гравировку, оптически измерено и поставляется с заводской справкой.

Выберите аналитические сита

АНАЛИТИЧЕСКИЕ СИТА ИЗ НЕРЖАВЕЮЩЕЙ СТАЛИ, 400 ММ Ø, 65 ММ ВЫСОТА СОГЛАСНО ASTM E11

1" = 25 mm mesh
№ 34.0210.02
Test sieve, ASTM E11 mesh - 1" = 25 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
7/8" = 22.4 mm mesh
№ 34.0310.02
Test Sieve, ASTM  E11 mesh - 7/8" = 22.4 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
3/4" = 19 mm mesh
№ 34.0610.02
Test sieve, ASTM E11 mesh - 1" = 19 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
5/8" = 16 mm mesh
№ 34.0810.02
Test sieve, ASTM E11 mesh - 5/8" = 16 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
0.53" = 13.2 mm mesh
№ 34.0910.02
Test sieve, ASTM E11 mesh - 0.53" = 13.2 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
1/2" = 12.5 mm mesh
№ 34.1010.02
Test sieve, ASTM E11 mesh - 1/2" = 12.5 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
7/16" = 11.2 mm mesh
№ 34.1110.02
Test sieve, ASTM E11 mesh - 7/16" = 11.2 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
3/8" = 9.5 mm mesh
№ 34.1210.02
Test sieve, ASTM E11 mesh - 3/8" = 9.5 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
5/16" = 8 mm mesh
№ 34.1410.02
Test sieve, ASTM E11 - 5/16" mesh = 8 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
0.265" = 6.7 mm mesh
№ 34.1510.02
Test sieve, ASTM E11 mesh - 0.265" = 6.7  mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request. All mesh widths are also available as test sieves with 200 mm/8“ dia. Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
1/4" = 6.3 mm mesh
№ 34.1610.02
Test sieve, ASTM E11 mesh - 1/4" = 6.3 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
3 1/2" = 5.6 mm mesh
№ 34.1710.02
Test sieve, ASTM E11 mesh - 3 1/2" = 5.6 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
4 = 4.75 mm mesh
№ 34.1810.02
Test sieve, ASTM E11 mesh - 4 = 4.75 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
5 = 4 mm mesh
№ 34.2010.02
Test sieve, ASTM E11 mesh - 5 = 4 mm mesh

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
6 = 3.35 mm mesh
№ 34.2110.02
Test sieve, ASTM E11 mesh - 6 = 3.35 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
7 = 2.8 mm mesh
№ 34.2310.02
Test sieve, ASTM E11 mesh - 7 = 2.8 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
8 = 2.36 mm mesh
№ 34.2410.02
Test sieve, ASTM E11 mesh - 8 = 2.36 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
10 = 2 mm mesh
№ 34.2610.02
Test sieve, ASTM E11 mesh - 10 = 2 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
12 = 1.7 mm mesh
№ 34.2810.02
Test sieve, ASTM E11 mesh - 12 = 1.7 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
14 = 1.4 mm mesh
№ 34.2910.02
Test sieve, ASTM E11 mesh - 14 = 1.4 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange! 


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
16 = 1.18 mm mesh
№ 34.3010.02
Test sieve, ASTM E11 mesh - 16 = 1.18 mm

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange! 


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
18 = 1 mm mesh
№ 34.3210.02
Test sieve, ASTM E11 mesh - 18 = 1 mm mesh

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange! 


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
20 = 850 µm mesh
№ 34.3410.02
Test sieve, ASTM E11 mesh - 20 = 850 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange! 


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
25 = 710 µm mesh
№ 34.3510.02
Test sieve, ASTM E11 mesh - 25 = 710 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
30 = 600 µm mesh
№ 34.3610.02
Test sieve, ASTM E11 mesh - 30 = 600 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
35 = 500 µm mesh
№ 34.3810.02
Test sieve, ASTM E11 mesh - 35 = 500 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
40 = 425 µm mesh
№ 34.4010.02
Test sieve, ASTM E11 mesh - 40 = 425 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
45 = 355 µm mesh
№ 34.4110.02
Test sieve, ASTM E11 mesh - 45 = 355 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
50 = 300 µm mesh
№ 34.4210.02
Test sieve, ASTM E11 mesh - 50 = 300 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
60 = 250 µm mesh
№ 34.4410.02
Test sieve, ASTM E11 mesh - 60 = 250 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
70 = 212 µm mesh
№ 34.4610.02
Test sieve, ASTM E11 mesh - 70 = 212 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
80 = 180 µm mesh
№ 34.4710.02
Test sieve, ASTM E11 mesh - 80 = 180 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
100 = 150 µm mesh
№ 34.4810.02
Test sieve, ASTM E11 mesh - 100 = 150 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
120 = 125 µm mesh
№ 34.5010.02
Test sieve, ASTM E11 mesh - 120 = 125 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
140 = 106 µm mesh
№ 34.5210.02
Test sieve, ASTM E11 mesh - 140 = 106 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
170 = 90 µm mesh
№ 34.5410.02
Test sieve, ASTM E11 mesh - 170 = 90 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
200 = 75 µm mesh
№ 34.5810.02
Test sieve, ASTM E11 mesh - 200 = 75 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data
230 = 63 µm mesh
№ 34.6010.02
Test sieve, ASTM E11 mesh - 230 = 63 <span class="to-lower">µm</span>

Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.


Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!


ЭЛЕМЕНТНЫЙ АНАЛИЗ
General specifications
MaterialStainless steel – 1.4301
ISO/EN/DIN codeX5CrNi18-10
Chemical composition
ElementShare %
Iron – Fe66.75
Carbon – C0.070
Silicon – Si1.000
Manganese – Mn2.000
Phosphorus – P0.045
Sulphur – S0.030
Chromium – Cr19.5
Nickel – Ni10.5
Nitrogen – N0.110
Physical and mechanical properties
Density7.9 g/cm³
Hardness215 HB


Explanations on hardness data

СЕРТИФИКАЦИЯ

Документация IQ/OQ (формат вопросника - реализация заказчиком) для самостоятельного использования в целях поддержки квалификации приборов в системе менеджмента качества для Мощный аналитический грохот ANALYSETTE 18.

Выберите сертификацию

Certification

IQ/OQ documentation (questionnaire format - implementation not included)
№ 96.0420.00
IQ/OQ documentation (questionnaire format - implementation not included)

IQ/OQ documentation (questionnaire format - implementation by customer) for the independent utilization for the support of instrument qualification in the quality management system for the Heavy Duty Analytical Sieve Shaker ANALYSETTE 18.


№ для заказа
18.3020.00
Helen Müller
FRITSCH GmbH - Milling and Sizing
Industriestrasse 8
55743 Idar-Oberstein
Телефон +49 67 84 70 0
ИСПЫТАТЬ СЕЙЧАС

БЕСПЛАТНЫЙ СИТОВОЙ АНАЛИЗ

Пришлите нам свою пробу, и мы выполним тестовый ситовой анализ - вы получите индивидуальный протокол ситового анализа.